Temperature in the attic of reduced models of poultry houses with different roof insulation technologies

Authors

DOI:

https://doi.org/10.30612/agrarian.v15i55.15122

Keywords:

Poultry Farming, Ambience, Arduino, Thermal Comfort

Abstract

The objective of this study was to determine and compare the internal temperature of the attic of reduced scaled models of poultry houses with different thermal insulation technologies on the roof. Nine reduced models were analyzed, three of which were covered only with metal tiles (zinc tile); three with an association of this zinc tile with thermal blanket (known as asphalt blanket); and three other models with an association of metal tiles with Extruded Polystyrene (XPS) sheets. The temperature analysis was performed using DS18B20 sensors installed in the attic, 15 cm above the lining of each reduced model and another sensor on the outside to compare the temperature of the internal environment with the external variation. It was concluded that, when the absolute external temperature was the highest, the models with the application of XPS board had a lower attic temperature, on average 3.4°C when compared to the zinc roof tile alone, presenting itself as the best technology among those tested, being technically a viable option for application in zootechnical buildings, given its greater capacity for thermal insulation. The asphalt blanket, on the other hand, did not show efficiency in thermal insulation, possessing thermal characteristics close to the behavior of metal tiles, especially under high temperature conditions.

Downloads

Download data is not yet available.

Author Biographies

José Gabriel Vieira Neto, Universidade Federal do Pampa (Unipampa)

Universidade Federal do Paraná (UFPR)

Carlos Henrique Souza, Cocamar Cooperativa Agroindustrial (COCAMAR)

Engenheiro Agrícola, graduado pela Universidade Estadual de Maringá

Rodrigo Pinheiro Silva, Universidade Estadual de Maringá - UEM

Biólogo, graduado pela Universidade Estadual de Maringá e atualmente servitor técnico no campus Arenito - UEM.

References

Almeida, E. A.; Souza, F. A.; Furlan, R. L; Turco, J. E. P. & Milani, A. P. 2018. Thermal behavior of metallic and fiber cement tiles with simple and double layers. Journal of Anim. Behav. Biometeorol 6:72-76. http://dx.doi.org/10.31893/2318-1265jabb.v6n3p72-76

Arruda, D. Z. 2018. Avaliação de ambiente térmico de galpões com e sem isolamento térmico para poedeiras comerciais. 27 f. Trabalho de conclusão de curso (Engenharia Agrícola) Universidade Federal do Mato Grosso, Rondonópolis.

Baêta, F. C. & Souza, C. F. 2010. Ambiência em edificações rurais: conforto animal. Viçosa: UFV, 2 ed., 269 p.

Bueno do Prado, J. P. & Nóbrega, M. T. 2005. Determinação de perdas de solo na bacia hidrográfica do córrego Ipiranga em Cidade Gaúcha, Estado do Paraná, com aplicação da Equação Universal de Perdas de Solo (EUPS). Acta Scientiarum. Technology, v. 27, n. 1, p. 33-42.

Buildspuma – Isolamento térmico Spumapac. Disponível em: <http://www.buildspuma.com.br>.

Carvalho, H. G. 2013. Materiais de cobertura e suas associações a forros e materiais isolantes no ambiente térmico de protótipos abertos e fechados com vistas a produção de frangos de corte em clima quente. 108 f. Tese (Doutorado em Construções rurais e ambiência) - Universidade Federal de Viçosa, Viçosa.

Coutinho, C. P.; Baptista, A. J.; Rodrigues, J. D. 2016. Reduced scale models based on similitude theory: A review. Engineering Structures, v. 119, p. 81-94. https://doi.org/10.1016/j.engstruct.2016.04.016

Dias, A. S. 2011. Avaliação do desempenho térmico de coberturas metálicas utilizadas em edificações estruturadas em aço. 110 f. Dissertação (mestrado em Engenharia Civil). Universidade Federal de Ouro Preto, Ouro Preto.

Ferreira Junior, L.G.; Yanagi Junior, T.; Damasceno, F.; Silva, E. & Silva, G. C. A. 2009. Ambiente térmico no interior de modelos físicos de galpões avícolas equipados com câmaras de ventilação natural e artificial. Engenharia na Agricultura, v. 27, n. 3, p. 166-178, 2009. https://doi.org/10.1590/S0100-69162005000300002

Inmet – Instituto Nacional de Meteorologia. Dados da estação meteorológica automática de Cidade Gaúcha – PR (A 869). Disponível em: .

Morais, S. R. P.; Tinôco, I. F. F.; Baêta, F. C.; Yanagi Junior, T.; Vigoderis, R. B. & Cecon, P. R. 2001. Study of thermal environment for scaled models of broiler houses, using tiles of clay, asbestos and aluminum, under summer conditions. In: International Livestock Environment Symposium, 6., 2001, Louisville. Proceendings... Louisville, Kentucky: ASAE,. p. 473-477.

Murphy, G. C. E. 1950. Similitude in engineering. New York: Ronal Press. 302 p.

Oliveira, Z. B. & Knies, A.K. 2019. Análise bioclimática e investigação do conforto térmico em ambiente externo na região central do RS. Energia na Agricultura, 34(3), 377-388. https://doi.org/10.17224/EnergAgric.2019v34n3p377-388

Pedote, L. & Franco, T. 2012. Análise da Eficiência Térmica de Diferentes Tipos de Coberturas para Casas de Emergência. Trabalho de Conclusão de Curso (Bacharelado em Engenharia Química). Universidade de São Paulo. São Paulo.

Santos, P.A.; Yanagi Junior, T.; Teixeira, V.H. & Ferreira, L. 2005. Ambiente térmico no interior de modelos de galpões avícolas em escala reduzida com ventilação natural e artificial dos telhados. Revista Engenharia Agrícola, 25(3), 575-584. https://doi.org/10.1590/S0100-69162005000300002

Sevegnani, K.B.; Ghelfi Filho, H. & Silva, I. J. O. 1994. Comparação de vários materiais de cobertura através de índices de conforto térmico. Sci. Agric., 51(1), 1-7. https://doi.org/10.1590/S0103-90161994000100001

Vieira Neto, J. G.; Silva, R. P.; Bacon, E. C. V.; Sierakowski, J. P.; Souza, E. L. & Benetão Júnior, C. R. 2017. Desenvolvimento de um sistema de monitoramento e coleta de dados ambientais para modelos reduzidos. In: III Workshop Internacional de Ambiência de Precisão, Feagri/Unicamp.

Downloads

Published

2022-12-30

How to Cite

Vieira Neto, J. G., Souza, C. H., & Silva, R. P. (2022). Temperature in the attic of reduced models of poultry houses with different roof insulation technologies. Agrarian Journal, 15(55), e15122. https://doi.org/10.30612/agrarian.v15i55.15122

Issue

Vol. 15 No. 55 (2022)

Section

Article - Agricultural Engineering

License

Copyright (c) 2023 José Gabriel Vieira Neto, Carlos Henrique Souza, Rodrigo Pinheiro Silva

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.

Authors who publish with this journal agree to the following terms:

  • Authors authorize the publication of the article in the journal.

  • The authors ensure that the contribution is original and unpublished and is not being evaluated in other journal.

  • The journal is not responsible for the opinions, ideas and concepts expressed in the texts because they are the sole responsibility of the authors.
  • The publishers reserve the right to make adjustments and textual adaptation to the norms.
  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) only after publication.